COMPLETE CLOSED SYSTEM
Mega Milling & Mining's complete closed system as shown in video consists of a 1 Ton mobile mill attached to a spray bar and two Action Micron Wave Tables. The ore is fed into the Mega Mill UF (Ultra Fine) at a specific rate of 8 oz. per second and then blown by the mill into the spray bar saturating system to make a slurry mixture for the specific ore that is flowing into the Action Micron Wave Tables for recovery of precious metals concentrate.
Oxide Ore is being fed in small 50 lb. batches for assay purposes. Ultra fine mill ore is being blown by the mill through a spray bar that is producing a slurry mixture and eliminating the amount of dust that is produced by ultra fine milling. This 200-400 mesh (approx average 325 mesh) (45 microns slurry mixture) is being fed onto Action Micron Wave Tables, and the recovery process begins. The concentrates of various heavy metals depending on the ore makeup will result in a line of concentrate or precious metal at the high end of the table and can be collected with a small wet vac for lab test purposes or can fall into the trough and be collected for larger batches to be refined. Please follow the complete process and you can see the outstanding recovery results.